Explosion Proof LED Lighting Fixtures

In North American, the explosion proof lighting should be tested and certified to both the UL 1598 and UL 844 safety standards, to help avoid explosive accidents during use of the lighting fixture. Among this, Lights approved by UL844 Class 1 Division 1 (C1D1) can be used in the most dangerous gas environment.

Class I, Division 1: There are three different situations that could exist to classify an area as a Class I, Division 1 location:

  • Ignitable concentrations of flammable gases or vapors may exist under normal operating conditions.
  • Ignitable concentrations of such gases or vapors may exist frequently because of repair or maintenance operations or because of leakage.
  • Breakdown or faulty operation of equipment or processes might release ignitable concentrations of flammable gases or vapors, and might also cause simultaneous failure of electric equipment.

Class I, Division 2: One of the following three situations must exist in order for an area to be considered a Class I, Division 2 location:

  • Volatile flammable liquids or flammable gases are handled, processed or used, but the hazardous liquids, vapors or gases will normally be confined within closed containers or closed systems from which they can escape only in the event of accidental rupture or breakdown of such containers or systems, or as a result of abnormal operation of equipment.
  • Ignitable concentrations of gases or vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operations of the ventilating equipment.
  • Adjacent to a Class I, Division 1 location, and to which ignitable concentrations of gases or vapors might occasionally be communicated unless such communication is prevented by adequate positive-pressure ventilation from a source of clean air, and effective safeguards against ventilation failure are provided.

AmeriTech has taken great efforts to design for your safety and offers a complete product line of fixtures designed for these C1D1 and C1D2 applications.

Alabama/Arizona EP Series

ARIZONA EP – This LED was designed as a spot light, down light, tunnel light, flood light and wall pack which can provide general illumination in hazardous locations, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 20W – 200W (2,800 to 28,000 lumen output)
  • Square design, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 90 degree beam angle for excellent uniformity.
  • Wall mount, Ceiling mount or Pendant mount.
  • All products qualify for utility rebates.
Polaris Jar EP

POLARIS JAR EP – Designed as a downlight for hazardous locations to illuminate explosive sensitive areas, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 20W – 200W (2,800 to 28,000 lumen output)
  • Jar design with protective cage, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 180 degree beam angle for excellent uniformity.
  • Pendant mount or Ceiling mount.
  • All products qualify for utility rebates.
Polaris EP

POLARIS EP – Designed for hazardous locations as an area light for illuminating hazardous locations with uniformity and brilliance, while safely operating in these sensitive areas, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 60W – 150W (8,400 to 21,000 lumen output)
  • Round design with sealed cover, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 90 degree beam angle for excellent uniformity.
  • Pendant mount, Wall mount or Ceiling mount.
  • All products qualify for utility rebates.
Lockness EP

LOCKNESS EP – Designed for hazardous locations to be used as a tight isleway or narrow area for illuminating hazardous locations with uniformity and brilliance, while safely operating in these sensitive areas, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 40W – 80W (5,600 to 11,200 lumen output)
  • Protected round cylinder design with sealed cover, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 180 degree beam angle for excellent uniformity.
  • Pendant mount, Wall mount or Ceiling mount.
  • All products qualify for utility rebates.

Alabama/Arizona EP Series

ALABAMA EP – Designed for hazardous locations to be used as a flood light for illuminating hazardous locations with uniformity and brilliance, while safely operating in these sensitive areas, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 20W – 180W (2,800 to 25,200 lumen output)
  • Square design with sealed cover, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 90 degree beam angle for excellent uniformity.
  • Pendant mount, Wall mount or Ceiling mount.
  • All products qualify for utility rebates.

Torpedo EP

TORPEDO EP – Designed for hazardous locations to be used as a tight isleway or narrow area for illuminating hazardous locations with uniformity and brilliance, while safely operating in these sensitive areas, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 40W – 120W (5,600 to 16,800 lumen output)
  • Wide round design with sealed cover, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 180 degree beam angle for excellent uniformity.
  • Pendant mount, Wall mount or Ceiling mount.
  • All products qualify for utility rebates.
Excaliber EP

EXCALIBUR EP – Designed for hazardous locations to be used in lower height areas where wide light distribution is needed, safely operates in these sensitive areas, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 10W – 40W (1,400 to 7,000 lumen output)
  • Elongated protected round cylinder design with sealed cover, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 200 degree beam angle for excellent uniformity.
  • Pendant mount, Wall mount or Ceiling mount.
  • All products qualify for utility rebates.
Illuminator EP

ILLUMINATOR EP – Designed for hazardous locations to be used in lower height areas where wide light distribution is needed, safely operates in these sensitive areas, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 10W – 50W (1,400 to 7,000 lumen output)
  • Wide, flat design with sealed cover, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 140 degree beam angle for excellent uniformity.
  • Pendant mount, Wall mount or Ceiling mount.
  • All products qualify for utility rebates.
Humpback EP

HUMPBACK EP – Designed for hazardous locations to be used in lower height areas where wide light distribution is needed, safely operates in these sensitive areas, such as:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 30W – 80W (4,200 to 11,200 lumen output)
  • Concave design for narrow isles with sealed cover, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 60 degree beam angle for excellent uniformity.
  • Pendant mount, Wall mount or Ceiling mount.
  • All products qualify for utility rebates.
Exit EP

EXIT RED EP – Designed for hazardous locations to provide exit illumination for exiting the area in case of emergency situation. Areas of use:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 3W – 11W (4,200 to 11,200 lumen output)
  • Dual sided lit exit sign for illuminating isleways for exiting, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 360 degree beam angle for excellent uniformity.
  • Pendant mount, Wall mount or Ceiling mount.
  • All products qualify for utility rebates.
Maintenance Light EP

MAINTENANCE EP – Designed for maintenance people to use when performing maintenance inside explosion proof areas. Areas of use:

  1. Oil refineries and Gas stations 2. Oil and gasoline loading docks
  2. Distilleries 4. Painting manufacturing plants
  3. Pumping stations 6. Mines 7. Grain, Flour and Sugar Silo areas
  4. Vessels 9. Other high humility, high temperature, dusty locations
  • Standard Voltage Range supported (100V-277V, 480V optional).
  • 5W to 9W (650 Lumens – 1,170 Lumens)
  • Enclosed and protected utility light for maintenance personnel, Anti-Glare Clear lens.
  • Waterproof, Vapor proof and Dustproof.
  • 360 degree to shine light where you need.
  • Pluggable with extension cord.
  • All products qualify for utility rebates.